|
|
|
|
THE PEN PLACE™Lithco first introduced "Correct-A-Plate™" deletion and addition pens for positive and negative metal plates over twenty-five years ago. We have tested many look-a-likes since then, but none have met the high standards of our originals. Now there are "Correct-A-Plate" pens for electrostatic plates and black plates, such as Silvermaster® and Megalith®. We have also broadened the line to include red and black opaqueing pens sold under the name "Correct-A-Neg™".
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CORRECT-A-PLATE ADDITION AND DELETION PENS | ||||
|---|---|---|---|---|
| Part # |
Plate |
Type |
Tip |
Usage/Application Notes |
| CAP-AF | Metal | Addition | Fine | Works on or off the press. Clean plate with solvent, then dry. Write-in correct image as desired, allow image to dry, then continue run. |
| CAP-AB | Broad | |||
| CAP-DF | Metal | Deletion | Fine | Removes scratches, scumming, toning and oxidation. Works on the image without affecting the plate coating. Brush-on, wipe off with a damp pad. Deletion is permanent. |
| CAP-DB | Broad | |||
| CAP-BAF | Silvermaster®** | Addition | Fine | Add images and correct pin-holes on all types of black plates. Apply to clean plate surface, let dry thoroughly, then continue run. |
| CAP-BAB | Broad | |||
| CAP-SMDF | Silvermaster®** | Deletion | Fine | Remove unwanted images from all types of black plates. Apply lightly to remove shadows and cut-marks. Image may remain on plate but will be non-ink receptive. |
| CAP-SMDB | Broad | |||
| CAP-ESTATAF | Electrostatic | Addition | Fine | Add images and fill-in pin holes on all electrostatic masters. Make additions prior to etching. |
| CAP-ESTATDF | Electrostatic | Deletion | Fine | A quick and easy way to delete images and cut marks from wet-toner, electrostatic masters. Deletion must be done prior to etching plate. Image will remain visible on plate, but will be non-ink receptive. |
| CAP-ESTATDB | Broad | |||
*Box price = 12 pens same item
**Designed to work with all "Black" plates such as Silvermaster®, Megalith®
and Mitusbishi photo direct materials
 |
 |
 |
 |
 |
 |
For Metal, Silvermaster or Electrostatic plates
Mark-Tex plate correction pens have been favorites in the pressroom for many years. Use either on or off the press.
| Part # | Plate | Type | Tip |
| MAR-2100 | Metal | Addition | Fine |
| MAR-2101 | Metal | Addition | Broad |
| MAR-2200 | Metal | Deletion | Fine |
| MAR-2201 | Metal | Deletion | Broad |
| MAR-3200 | Electrostatic | Addition | Fine |
| MAR-3100 | Electrostatic | Deletion | Fine |
| MAR-3101 | Electrostatic | Deletion | Broad |
| MAR-4100 | Silvermaster | Deletion | Fine |
| MAR-4101 | Silvermaster | Deletion | Broad |
*Box price = 12 pens same item
HELPFUL TIP
To prevent pens from drying out prematurely, keep tightly closed when not in use. Store tip down in a cool location.
Quickly indicates whether paper is acidic or alkaline
Turns
yellow for acid, violet for alkalineAids
in balancing fountain solution to the paper stockReduces
picking and toning problems especially with vegetable-oil based inks| Part # | Description |
| CAP-PH |
Paper pH Test Pen, Fine Point |
*Box price = 12 pens same item
Back to top
HOW TO USE HONES
Dip the hone into fountain solution. Lightly rub the image to be deleted. Make sure the plate is on a hard, flat surface to prevent denting the plate. Finally, buff-out any light scratches with Lithco Pumice on a Webril Wipe, saturated with fountain solution.
|
We have several ways for you to order any of the products you've seen at LithcoProducts.com.
|
